DELCO OFFICE SYSTEMS MODULARITEE MODUMAIL

HOME

MODULARITEE

MODUMAIL

COUNTER
REVOLUTION

SYSTEMIZERS

INTERIORS

MAIL ROOM &
MAIL HANDLING CARTS

REQUEST INFO

E-MAIL

MODUMAIL is available in either closed or open back units. There are 5 standard widths, 60", 48", 36", 30" and 25", but any width up to 60" is available to suite your special requirements. Please note that the open back units require thicker end panels for stability.
The units are stackable, interlock for stability; allowing you to add to them at any time.
All end panels have rounded corners for a contemporary appearance and safety; a unique feature!
Compartment heights are adjustable on 1/2" increments and the width of the compartments may be changed at any time since the shelf supports may be moved infinitely at your will.

Unit
Description Model
Number Overall
Width Inside
Width Overall
Depth Inside
Depth

60" Closed Back MM-60-CLB 59.60" 57.75" 12.35" or 15.35" 12" or 15"

60" Open Back MM-60-OPB 59.60" 54.75" 12.35" or 15.35" 12" or 15"

48" Closed Back MM-48-CLB 48.00" 46.15" 12.35" or 15.35" 12" or 15"

48" Open Back MM-48-OPB 48.00" 43.15" 12.35" or 15.35" 12" or 15"

36" Closed Back MM-36-CLB 36.00" 34.15" 12.35" or 15.35" 12" or 15"

36" Open Back MM-36-OPB 36.00" 31.15" 12.35" or 15.35" 12" or 15"

30" Closed Back MM-30-CLB 29.80" 27.95" 12.35" or 15.35" 12" or 15"

30" Open Back MM-30-OPB 29.80" 24.95" 12.35" or 15.35" 12" or 15"

25" Closed Back MM-25-CLB 24.85" 23.00" 12.35" or 15.35" 12" or 15"

25" Open Back MM-25-OPB 24.85" 20.00" 12.35" or 15.35" 12" or 15"

Units are also available in any special width up to 60"
Specify 12" or 15" deep.

Shelves are available in 9 standard widths; however, any width shelf up to 16" is available to accommodate your specific needs.
Full width, sloped label holders include a slot for insertable 3/8" high label strips on the front and back of the shelves as a standard feature.
Shelves reinforced with concealed steel channels are available for heavy loads; especially useful with wide shelves.
Shelves are adjustable vertically on 1/2" increments, lock firmly in place, but are easily removed.
Specify 12" or 15" deep.

STANDARD SHELF SIZES

Model
Number Nominal Inside
Clear Width Actual
Overall Width

7 LS 7" 7.35"

8 LS 8" 8.35"

9 LS 9" 9.42"

10 LS 10" 10.35"

11 LS 11" 11.35"

12 LS 12" 12.35"

14 LS 14" 14.25"

15 LS 15" 15.35"

16 LS 16" 16.55"

Shelves are also available in any special width up to 16".

Model Number SS-LT-1

Shelf supports, used to support the shelves and to divide the units into vertical compartments, may be placed at any position along the base.
Shelf supports fit securely into the base of the unit.
Shelf supports permit the shelves to be adjusted vertically on 1/2" increments. The support locks the shelves firmly in place, but allows them to be easily removed.
Arrows embossed on the front sides of the supports allow easy alignment of the shelves; another unique feature!
Each end panel has a built-in support.
When determining how many shelf supports you need, one more shelf support is required than the number of vertical compartments. These include the shelf supports built into the end panels.
Specify 12" or 15" deep and color; putty gray or dove gray.

Model Nubmer MPD-001

Utility drawers are available for 9" wide shelf columns. Only applicable to 12" deep units.

Model Number BD-101

Designed to support books and folders, these dividers lock firmly into place, but move easily horizontally to any position you may wish. Only applicable to 12" deep units.

Tables are made of heavy guage steel and come with a full depth storage shelf with or without doors.
Standard color is putty with 1¼" laminated tops in putty or light oak and tough vinyl bull-nose edging in dark brown.
Available in two widths and two heights.
COUNTER REVOLUTION Lamimated Tables are also available in several colors including; putty gray, dove dray, light gray among others - special sizes are also available. See "COUNTER REVOLUTION" page.

STEEL TABLES

Model # Width Depth Height

T-6030-36 60" 30" 36"

T-6030-29 60" 30" 29"

T-3030-36 30" 30" 36"

T-3030-36 30" 30" 29"

Add "D" to numbers if doors are required.

Model Numbers R-30 and R-60

Risers are made of heavy gauge steel in putty color with 1¼" laminated tops to match the work tables.
Available in two widths, 29.6" or 59.6", and are 16¼" high and 12" deep or 15" deep.
Acoustic panels, to reduce sound transmission, are available for the inside or outside back panel of the risers.

Model Number DR-6030

Secured to the top of the 60" work tables, dump rails are 59.6" wide, 6" high, 29.6" deep and are laminated to match the work tables.

Model Number MCD-3800

7/8" square tubing frame with nickle chrome finish and 5" wheels with permanently sealed and lubricated ball bearings.
Heavy gauge steel-wire removable baskets have adjustable hanger file rods for legal or letter size folders.
Shipped ready to use. No assembly except easy-to-install handle.

For more information and price lists contact us today.

E-Mail
DELCO OFFICE SYSTEMS
Division of Delco Associates, Inc.
55 Old Field Point Road
P.O. Box 423
Greenwich, CT 06830
203-661-5101 | 800-243-8528 | Fax: 203-661-9829

If your experience problems with this site, please contact our Webmaster.
© Copyright 1998 Delco Office Systems